Payment & Shipping Terms:
|Focused Technology:||Cryolipolysis + Vacuum + LED||Handpieces:||2*cryolipolysis + Vacuum (170*60*55mm)|
|Blue Light:||Up To 2W||Pump Suction Rate:||1-10 Level Adjustable|
|Negative Pressure Rating:||0,20 ~ 60KPa||Power Supply Voltage:||AC200 ~ 240V AC100 ~ 110V 50 ~ 60Hz|
2017 Newest vertical device Coolsculption Cryolipolysis body contouring Fat Freezing slimming Machine
1. Cryo Fat Freezing.
2. Circumference and Cellulite Reduction.
3. Body Contouring.
4. Facial Lifting and Body Tightening.
5. Mechanical Massage.
6. cryolipolisis machine times vacuum machine have better effective .
lose weight (3-5KG)(4-6cm)
1 time /7-15 days
5-10 times / course
Auxiliary products: anti freezing membrane
1.Silical gel handle better protec
2.4000 guest record system
3.One year clinic test and simulated delivery test
4 Strong cooling system
5 Free anti-freeze membrane will be provided
6 TUV, ISO13485 from health canada ,and rohs certifications
1. Put the machine stability, do not connect to any handles and power supply.
2. Filled with deionized water or purified water,until water overflow. (put about 4L deionized water ).
3. If NOT use the machine for a long time, please drainage all the water.
4.Connect cryo handle well. Check whether connected right or not. And connect the cavitation and RF handles later.
|Pump Suction Rate||1-10 level adjustable|
|Blue light||up to 2W|
|Cooling||Continuous contact cooling (-10℃-0℃)|
|Stand-by Working||ontinuously for 18 hours (indoor temperature 25℃)|
1.4 handle with 4 modules, with four modules instead of spare parts, the separation of water and electricity, more secure, assembled with the rapid. So that a pump pump control a hand, increase the energy, the handle at the same time work but does not affect.
2. Add a secondary filter, filter the water vapor, solve the phenomenon of plugging the solenoid valve
3.The interface is simple and clear, the operation is simpler.
|Focused Technology||Cryolipolysis + Vacuum + LED|
|Pump Suction Rate||1-10 level adjustable|
|Blue light||Up to 2W|
|Cooling||Continuous contact cooling (-10℃~0℃ )|
|Stand-by Working||Continuously for 18 hours(indoor temperature)|
|Display||10.4" True Color LCD Touch Screen|
|Electrical Requirements||100-240VAC, 20A max., 50/60Hz|
Introduction to control systems:
Noise control: After the instrument is in standby for 3 minutes, the instrument only has the cooling fan to work with only the sound of the cooling fan,
Suction control: In the working state, when the operator is fully adsorbed, you can choose to stop the pump and solenoid valve work, so that the solenoid valve to the adsorption site to maintain the vacuum, but also can reduce the instrument noise.
Negative pressure range adjustable: When the customer feels the pressure value is large or small, you can adjust the pressure value in the background to fit your range and save
1. Be sure to use the special ultrasonic gel.
2. Avoid knocking the us head.
3. For avoiding burning the head, during operation, please prepare enough ultrasoinc gel.
4. Don’t stay in one place, avoid treating on the bone.
5. Don’t use disinfectant product to disinfect the us head. We suggest the wet cotton or dry towel enough.
6. Check the machine power cord if it is connected well.
7. If the machine will not use for a loing time, please switch off it, and power off.
8. Please take off all metal decoration from the operator and patient’s body.
9. If continuous using 1 hour, please pause the machine about 10 minutes, then using again.
10. During the operation, be sure not to accept other treatment.
When receive the machine , it must add the full water , then start the machine. Every week must add some water, every month must run out off the water and add fill again .Water source : pure water or distilled water .
when treating Cryolipolysis , the best temperature set : 3℃ - 5℃ .The handle cannot treat above neck, navel and bone. During treating ,please attention and ask the customer's felling . If patient fells too cold or uncomfortable,please button"emergency switch" to stop the machine .
*It use the Modular instead the part of the machine , it save time about producing ,and it is convient for after sales .
*With unique soft silicone handpieces contact cooling is safe and more efficient, 0 frostbite risks. The pressure range includes: 0,20 ~ 60KPa.
*The LED is 470nm LED blue light, shoot edema, speed up the metabolism, effectively avoid bounce.
* Unique MASSAGE technology, more comfortable and no burning risk for customers.
*It has two cooling pieces in each side, a total of four, can be fast and continuous cooling, is safe for customer.
*Highpower cooling power, precise control of the cooling of the patented technology, can automatically adjust the temperature, to prevent frostbite epidermis, fat accumulation of the site can be centralized treatment, will not hurt the surrounding other organizations.